WYT-T PM traction mahcine
WYT-T PM Traction machine is outer rotor PMS machine, it is Bluelight most popular product,after 10 years of continuous improvement,this series product has high quality standard,with superior performance,and can cover wide range of elevator application,it is your first choice for high performance elevator.
Strong quality assurance and production experience as we were the first in China, and we have rich experience and high reputation in the market. We provide complete solutions including a whole range of machines that cover single and double wrap based on your requirements. Our 2:1/1:1 suspension is suitable for MRA/MMR machine room and mini machine-room-less applications. The first PM traction machine was developed in 2015, which is the highest speed gearless traction machine made in China and has been used in testing towers. The motor is running in Canny testing tower with good performance.
Machine test we have machcine torque test,we run this time from time to make sure the PM traction machine quality is on the same level,two joint one machine on each side ,and will make torque run reverse diversion,where the torque meter in the middle moniter the torque value by compurters.and we have high temperature and humidity test ,to make our machine can run smoothly in high temperature conditions.for example in India middle east of Asia and south Africa,where they have high temperature in the machine room ,sometimes it's more than 60 degree.
Different kind of WYT-T PM traction machine to suitable your requirments,we have standard seriesWYT-TF,WYT=TM energy conservation, WYT-TS light duty,WYT-TD outer high performance and WYT-TE heavy duty
WYT-T PM Traction machine uses optimized mechanical structure design, high shaft load and high operating safety factor. We design it with high-efficiency, high-torque. The density design and optimized pole slot coordination are major features. Our machine can run smoothly with low noise and small vibration, so this series covers a wide range of elevator speed and capacity. It's our most popular product after 10 years of continuous improvement. This series product has high quality standard, with superior performance that can cover a wide range of elevator applications. It's your first choice for high performance elevator
Machine advantage because we have very high shaft load from the design level,our T model shaft load 3500kgs~5500kgs,some competitors use static load which means our parameter and standard are actually higher than other competitors and our machine can perform very stable torque at low speed ,this is hardest for gearless machine ,and our traction machine has low failure rate with high durability that can run for a long time .
